Dhcp Server; Dhcp Client List - Tenda F3 User Manual

❷
Primary DNS Address: Enter the preferred address of the DNS server provided by your ISP.
❸
Alternate DNS Address (optional): Enter the alternate DNS address if your ISP provides this
address.
❹
Click OK and go to the Tools page to reboot the device to activate these new DNS settings.

DHCP Server

DHCP server can automatically assign the broadband service info (IP Address, Subnet Mask,
Gateway and DNS Server Address) to the computer or smart phone, or other devices which are
connected to the Router. Do not disable this function until you want to configure the IP address
manually for each device connected to the Router.
Click Advanced > DHCP Server to modify the IP range and the lease time.
❶
DHCP Server: Check Enable. (It's enabled by default.)
❷
IP Pool Start/End Address: Configure the rightmost segment of the start address/end address,
say 100/150 shown in the picture.
❸
Lease Time: Select the lease time of the IP assigned automatically, say One day. When the
lease time is used up, the IP will renew automatically. So you don't need to reset it manually.
❹
Click OK.

DHCP Client List

This feature includes two parts, Static Assignment and DHCP Client List.
35