Tenda F3 User Manual page 72

MAN, you should go to COMPUTER2.
To avoid such inconvenient switch over these two isolated networks, as well as expand your
Internet service to more wireless devices, you can add this Tenda Router and set up a static routing.
Connect and configure the devices as below. Parameters here are examples.
Connection & Parameters Notes
1. Tenda Router and your located router (Router 1) should be connected via their LAN ports.
And both routers should be in the same network segment. Here both are in 192.168.0.0 segment.
Also, their LAN IP should be different. Here one is "192.168.0.1", the other is "192.168.0.10".
2. Your located router (Router 1) should disable its DHCP server. If you want to connect more
devices to Router 1, you should configure static IP for every wanted device which can also both
connect to the Internet and MAN.
Configuration
68