Qos; Bandwidth Control - Tenda F3 User Manual

3 QoS

Here QoS is about how to allocate the bandwidth properly for several clients which are connected
to your Router's wired or wireless network. You can go to Bandwidth Control to configure and
check traffic statistics in Traffic Status.

Bandwidth Control

Click QoS > Bandwidth Control to improve network performance by specifying the
download/upload speed for connected clients. The example below is for you to consult to configure
Bandwidth Control based on your own demands.
Example
Always several devices share 4M broadband service in your home. You recently have to watch lots
of news videos to prepare for a special program but only to find it's hard to go through the videos
smoothly. Your notebook starves for more bandwidths.
In this case, you can choose to configure a download bandwidth rule in Bandwidth Control to
allocate sufficient bandwidth for your notebook. If you calculate the download/upload speed by
yourself, these formats may help: 1M (Bytes) =1024K (Bytes); 1Bytes=8Bits. Upload bandwidth
rule is not always used unless you have to upload lots of files and videos.
Configuration
❶
Specify a static IP for your notebook (MAC address: 18:DC:56:A4:06:FA), "192.168.0.150".
Make it always automatically get "192.168.0.150" to access the Internet. Consult
Static Assignment
for steps.
1
58