Chapter 9 Routing Settings; Routing Table; Static Routing - Tenda FH303 User Manual

3

9.1 Routing Table

This page displays the router's routing table which lists destination IP, subnet
mask, gateway, hop count and interface.
The principal task for a router is to look for an optimal transfer path for data
forwarding, and transfer it to the specified destination. To complete this work,
the router stores and maintains related data of various transfer paths, i.e.
establishing a routing table, for future route selection.

9.2 Static Routing

When there are several routers in the network, you may want to set up static
routing. Static routing determines the path of the data in your network. You can
use this feature to allow users on different IP domains to access the Internet via
this device. It is not recommended to use this setting unless you are familiar with
static routing. In most cases, dynamic routing is recommended, because this
feature allows the router to detect the physical changes of the network layout
automatically. If you want to use static routing, make sure the router's DHCP
function is disabled.

Chapter 9 Routing Settings

57
FH303 Wireless N300 High Power Router