Dhcp Server - Guest Network - Tenda FH1202 User Manual

④
Click Save to save your settings.
----------------------------------------------------------------------------------------
Tip
1. If the IP address you have reserved for your PC is currently used by another
client, then you will not be able to obtain a new IP address from the device's
DHCP server, instead, you must manually specify a different IP address for your
PC to access Internet.
2. For PCs that has already obtained IP addresses, you may need to perform the
Repair action to activate the configured static IP addresses.
------------------------------------------------------------------------------------------------

2.8 DHCP Server - Guest Network

Click Network -> DHCP - Guest Network to enter the guest network DHCP server
screen. If you enable the built -in DHCP server for Guest Network on this device, it
will automatically configure TCP/IP protocol setting s for all DHCP -Client-enabled
PCs on the Guest Network, including IP address, subnet mask, gateway and DNS
etc.
Configuration Procedures:
①
Click Enable.
②
Start IP Address: Specify the start of the range for the pool of IP
addresses in the same subnet as the device.
34