Icom iGM1600 Instruction Manual page 19

5
SET MODE
D Battery voltage indicator "bt"
This function controls display or non-display settings of the
connected battery pack's voltage when the power is ON.
• The voltage of the connected battery pack is displayed for 2 sec.
after power is turned ON.
Battery voltage
indication OFF
(default)
D Signal strength indicator "Sl"
The signal strength indicator displays received signal strength
as "S-meter". This function is convenient to check the signal
strength visually.
• The strength is displayed at 4 steps.
• The antenna mark and 3 bars appear when receiving strong signals.
• The antenna mark only appears when receiving no signal.
Signal strength
indication OFF
(default)
14
Push
Battery voltage
indication ON
Push
Signal strength
indication ON
D Squelch sensitivity function "SS"
When this function is turned ON, blocking against noise is im-
proved. Therefore the squelch is not easily affected by noise.
Squelch sensitivity OFF
(default)
SET MODE LIST
Function
Beep tone function
Monitor switch action
Backlighting function
LCD contrast selection
Auto power save function
Self check function
Battery voltage indicator
Signal strength indicator
Squelch sensitivity
*default setting
Push
Squelch sensitivity ON
Indication Switch
"bP" OFF/ON*/US
"Sq" Push*/Hold
"bL" OFF/1/2/3*
"LC" 1/2/3*/4
"PS" OFF/ON*
"SC" OFF*/ON
"bt" OFF*/ON
"SI" OFF*/ON
"SS" OFF*/ON