Table of Contents
Advertisement
QSFP+ LEDs
Data Port RJ-45 LEDs
Management Port RJ-45 LEDs
© Copyright IBM Corp. 2012
The QSFP+ LEDs are shown in the following illustration.
Status LEDs for the QSFP+ ports are described in the following table. When the port
is set to 40 GbE mode, only the first LED applies. When the port is in 4 x 10 GbE
mode, each LED provides status for its corresponding 10 GbE port, as noted in the
following table.
Table 5. QSFP+ LEDs Status
Steady green
Valid Link
For each pair of ports, the left LED represents the odd-numbered port (bottom), and
the right LED represents the even-numbered port (top). Status LEDs for the RJ-45
data ports are described in the following table.
Table 6. RJ-45 LEDs Status
LED
Solid
Status
Up
Status LEDs for the RJ-45 management port are described in the following table.
Table 7. RJ-45 LEDs Status
LED
Solid
Status (Green)
Up
Activity (Amber)
N/A
Flash green
Activity
Blink
N/A
Blink
N/A
Link activity
Off
No Link
Off
Down
Off
Down
No activity
Chapter 1. Introduction
13
Advertisement
Table of Contents
