Table of Contents
Advertisement
© Copyright IBM Corp. 2012
To mount the RackSwitch G8264T in a standard equipment rack, complete the
following steps.
1. Use the M4 screws to attach a mounting bracket to each side of the switch.
Torque the screws to approximately 10 inch-pounds (1.13 Nm).
2. Slide the switch into the rack.
2
1
3. Use M6 screws, washers, and clip nuts (or cage nuts) to secure the switch unit
to the rack. Torque the screws to approximately 3.5 newton-meters (30
inch-pounds).
6
5
3
Chapter 2. Installing the RackSwitch G8264T
21
Advertisement
Table of Contents
