Pppoe Wizard-Detected Option - NETGEAR FWG114P Reference Manual

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P

PPPoE Wizard-Detected Option

If the Setup Wizard discovers that your ISP uses PPPoE, you will see this menu:
Figure 3-7: Setup Wizard menu for PPPoE accounts
• Enter the Account Name, Domain Name, Login, and Password as provided by your ISP. These
fields are case sensitive. The router will try to discover the domain automatically if you leave
the Domain Name blank. Otherwise, you may need to enter it manually.
• To change the login timeout, enter a new value in minutes. This determines how long the
router keeps the Internet connection active after there is no Internet activity from the LAN.
Entering a timeout value of zero means never log out.
Note: You no longer need to run the ISP's login program on your PC in order to access the
Internet. When you start an Internet application, your router will automatically log you in.
• If you know that your ISP does not automatically transmit DNS addresses to the router during
login, select "Use these DNS servers" and enter the IP address of your ISP's Primary DNS
Server. If a Secondary DNS Server address is available, enter it also.
Note: If you enter DNS addresses, restart your computers so that these settings take effect.
• If your ISP requires a specific MAC address for the connection, you may need to fill a MAC
address. Usually, it is not necessary to change the MAC address setting.
3-8 Connecting the FWG114P to the Internet
M-10177-01