NETGEAR FWG114P Reference Manual page 37

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
Choose the type of Serial Port Usage:
c.
• Auto-rollover with a wait time in minutes
• Primary Internet connection
Fill in the ISP Internet configuration parameters as appropriate:
d.
• For a Dial-up Account, enter the Account/User Name, Password, the Telephone
number to dial, an Alternative Telephone number if available. Check "Connect as
required" to enable the firewall to automatically dial the number. If you want to enable
a Idle Time disconnect, check the box and enter a time in minutes.
• To configure the TCP/IP settings, fill in whatever address parameters your ISP
provided.
Configure the Modem parameters:
e.
• Select the Serial Line Speed. This is the maximum speed the modem will attempt to use.
For ISDN permanent connections, the speeds are typically 64000 or 128000 bps. For
dial-up modems, 56000 bps would be a typical setting.
— For ISDN, select "Permanent connection (leased line)".
— For dial-up, select your modem from the list.
— If your modem is not on the list, select "User Defined" and enter the Modem
Properties.
Connecting the FWG114P to the Internet
Figure 3-13: Modem configuration menu
M-10177-01
3-15