Introduction; Key Features Of The Fwg114P - NETGEAR FWG114P Reference Manual

This chapter describes the features of the NETGEAR ProSafe Wireless 802.11g Firewall/Print
Server Model FWG114P.

Key Features of the FWG114P

The ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P with 4-port switch
connects your LAN to the Internet through a broadband modem. With auto fail-over connectivity
through the serial port, the FWG114P provides highly reliable Internet access.
The FWG114P is a complete security solution that protects your network from attacks and
intrusions. Unlike simple Internet sharing routers that rely on Network Address Translation (NAT)
for security, the FWG114P uses Stateful Packet Inspection for Denial of Service attack (DoS)
attack protection and intrusion detection. The FWG114P allows Internet access for up to 253
users. The FWG114P Wireless Firewall/Print Server provides you with multiple Web content
filtering options, plus browsing activity reporting and instant alerts -- both via e-mail. Parents and
network administrators can establish restricted access policies based on time-of-day, Website
addresses and address keywords, and share high-speed cable/DSL Internet access for up to 253
personal computers. In addition to NAT, the built-in firewall protects you from hackers.
With minimum setup, you can install and use the router within minutes. The FWG114P Wireless
Firewall/Print Server provides the following features:
• 802.11g and 802.11b standards-based wireless networking.
• Easy, web-based setup for installation and management.
• Content Filtering and Site Blocking Security.
• Built in 4-port 10/100 Mbps Switch.
• Ethernet connection to a WAN device, such as a cable modem or DSL modem.
• Extensive Protocol Support.
• Login capability.
• Front panel LEDs for easy monitoring of status and activity.
• Flash memory for firmware upgrade.

Introduction

M-10177-01
Chapter 2
Introduction
2-1