Daikin F-Series Service Manual page 202

SiBE12-713
2.2.5 Adjusting the Air Flow Direction
Adjusting the Air Flow Direction
You can adjust the air flow direction to increase
your comfort.
To adjust the horizontal
blade (flap)
1. Press "SWING button
• "
flaps will begin to swing.
2. When the flap has reached the
desired position,
press "SWING button
once more.
• The flap will stop moving.
• "
To adjust the vertical
blades (louvers)
Hold the knob and move the louver.
(You will find a knob on the left-side and the right-
side blades.)
Notes on flap and louvers angle
• Unless "SWING" is selected, you should set the
flap at a near-horizontal angle in HEAT mode and
at a upward position in COOL or DRY mode to
obtain the best performance.
ATTENTION
• When adjusting the flap by hand, turn off the unit,
and use the remote controller to restart the unit.
• Be careful when adjusting the louvers. Inside the
air outlet, a fan is rotating at a high speed.
12
Operation Manual
" is displayed on the LCD and the
" disappears from the LCD.
".
"
HEAT
1, 2
COOL/
DRY
Instruction
191