Field Settings From Remote Controller - Daikin VRV Service Manual

Field Settings from Remote Controller

1. Field Settings from Remote Controller
The following modes can be selected by using the
controller.
A-1. Setting of Individual Function for Indoor Unit
(Mode No. 10 to 15 / 20 to 25)
A-2. Setting in Centralized Control
(Mode No. 00 / 30)
A-3. Setting AirNet address
(Mode No. 03)
Following codes can be checked as often as
pressing CHECK/TEST button once.
· Malfunction code
· Indoor unit model code
· Outdoor unit model code
42
Press and hold the CHECK/TEST button
or a period of 4 seconds or more.
A.
Field Setting Mode
D.
Check Mode
CHECK/TEST
B.
B-1. Display of Service Data
(Mode No. 40/41)
B-2. Service Setting
(Mode No. 43/44)
Service Mode
Press and hold the CHECK/TEST button
or a period of 4 seconds or more.
Special Setting Mode
Normal Mode
After 10 seconds
Test Operation Mode
Press the CHECK/TEST
button once.
When the system put into "TEST OPERATION" mode,
forcedly thermostat on
("TEST OPERATION" is displayed on remote controller.)
button on the remote
C.
C-1. Special Field Setting
(Mode No.50)
E.
Field Settings from Remote Controller
Si30-408