View The Push-To-Talk Log; Log; Recent Calls; Call Duration - Nokia N91 User Manual

If you reject or clear the invitation, the invitation is stored
in your messaging inbox. To join the channel later,
open the invitation message, and accept.

View the push-to-talk log

Press , and select
PTT log. The log contains the following folders:
PTT, Received PTT, and
You can initiate a one-to-one call from
.

Log

Recent calls

To monitor the phone numbers of missed, received, and
dialled calls, press
Recent calls. The device registers missed and received calls
only if the network supports these functions, the device is
switched on, and within the network service area.
Tip! When you see a note in the standby mode about
missed calls, select
calls. To call back, scroll to a name or number,
and press
70
My Own > Push to talk >
Created PTT.
PTT log by pressing
, and select My Own > Log
Show to access the list of missed
.
Copyright © 2006 Nokia. All rights reserved.
To clear all recent call lists, select
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear
register, scroll to the event, and press
Options >

Call duration

Missed
To monitor the approximate duration of your incoming and
outgoing calls, press
To set the display of the call duration while a call is active,
select My Own
duration. Select
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select
timers. For this you need the lock code, see "Security",
"Phone and SIM", p. 95.
>

Packet data

To check the amount of data sent and received during
packet data connections, press
Log > Packet
your packet data connections by the amount of data sent
and received.
Options
list. To clear an individual event, open a
, and select Log
> Log > Options > Settings
Yes or No.
Options
, and select
data. For example, you may be charged for
> Clear recent
.
> Call duration.
> Show call
> Clear
My Own >