Nokia N91 User Manual page 105

Hide thumbs Also See for N91:
Table of Contents

Advertisement

Packet data
Follow the instructions from your service provider.
Access point name
point name is needed to establish a connection to packet
data networks. You obtain the access point name from
your network operator or service provider.
User
name—The user name may be needed to make a data
connection, and it is usually provided by the service
provider. The user name is often case-sensitive.
Prompt
password—Select
password every time you log in to a server, or if you do not
want to save your password in your device.
Password—A password may be needed to make a data
connection, and it is usually provided by the service
provider. The password is often case-sensitive.
Authentication—Select
Homepage—Depending on what you are setting up,
write the Web address or the address of the multimedia
messaging centre. Complete the
further define your access details:
Network
type—Select the Internet protocol type to use:
IPv4 settings
or
IPv6
on the selected network type.
94
(for packet data only)—The access
Yes
if you must enter a new
Normal
or Secure.
Advanced settings
settings. The other settings depend
Copyright © 2006 Nokia. All rights reserved.
Phone IP address
device.
DNS address—Primary name
server:. Contact your Internet service provider to obtain
these addresses.
Glossary: The domain name service (DNS) is an
Internet service that translates domain names such
as www.nokia-asia.com into IP addresses like
192.100.124.195.
Proxy serv.
address—Define the address for the proxy
server.
Proxy port
number—Enter the proxy port number.
Packet data
The packet data settings affect all access points using a
packet data connection.
Packet data
conn.—If you select
are in a network that supports packet data, the device
registers to the packet data network. Also, starting an
to
active packet data connection is quicker (for example,
to send and receive e-mail). If you select
the device uses a packet data connection only if you start
an application or action that needs it. If there is no packet
data coverage and you select
periodically tries to establish a packet data connection.
(for IPv4)—Enter the IP address of your
serv.:,
Second. name
When available
When
When
available, the device
and you
needed,

Advertisement

Table of Contents
loading

Table of Contents