Unlock Scanner; Connect Power And Usb Cables; Turn On The D-Digit Gel Scanner; Start D-Digit Image Acquisition Software - LI-COR D-DiGit User Manual

Unlock Scanner

1. Ensure the scanner is powered off, and the
power cord is unplugged.
2. With the rear panel of the scanner facing
you, tilt the scanner and locate the locking
switch underneath the scanner.
3. Push the locking switch to the left until the
"unlocked" icon is showing, as indicated in
the graphic at right.

Connect Power and USB Cables

1. Connect the power adapter
Connect the power adapter to the back of the scanner. Plug one end of the power cord into the
power adapter and the other end into a wall outlet.
2. Connect the USB cable
Connect one end of the USB cable to your
computer and the other end to the scanner.

Turn on the D-DiGit Gel Scanner

Turn the Power switch on the back of the D-DiGit Gel Scanner to "On".
Once powered on, the D-DiGit Gel Scanner will
be ready to scan.

Start D-DiGit Image Acquisition Software

Double-click the D-DiGit Image Acquisition Software shortcut
D-DiGit Gel Scanner is detected, the D-DiGit Image Acquisition Software control panel will activate.
D-DiGit™ Gel Scanner
When shipping the D-DiGit Gel
Scanner, ensure the switch is in
the locked position. See Prepare
Scanner for Shipment on page 12
for more information.
2
on the desktop. Once your
Unlocked Locked
1
Page 5