Semi-Auto Tuning And Manual Tuning - Sanyo CP21AF2X Instruction Manual

Tuning of the Channels

Semi-Auto Tuning and Manual Tuning

1 Press the MENU button for MAIN menu
display.
2 Select "PRESET" by pressing the
Programme UP or DOWN button.
PICTURE
A U D I O
PRESET
3 Press the VOLUME + or - button for
PRESET menu display. On entering
PRESET display, Automatic Tuning will
be selected initially.
4 Select "SEMI" or "MANUAL" by pressing
the VOLUME + or - button.
Semi-Auto Tuning Mode
MODE
SEMI
SEARCH START
POSITION 2
SKIP OFF
- -
MEMORY
SELECT ADJUST
P P
M
5 For example, to pre-set a required
channel onto Programme Position 6;
Press remote control button number 6
and enter 6. (In this case, the channel
being watched will change to channel
6.)
MODE SEMI
SEARCH START
POSITION 6
OFF
SKIP
- -
MEMORY
SELECT ADJUST
For example, to enter Programme Position 27,
press the Digit button, press the remote
control button 2 followed by 7.
Manual Tuning Mode
MODE MANUAL
SEARCH START
POSITION 2
SKIP OFF
- -
MEMORY
BACK
EXIT
SELECT ADJUST
P P
M
BACK
P P
EXIT
M
It is also possible to select the Programme posi-
tion number by pressing either of the VOLUME +
or - button. In this case, select "POSITION" with
the Programme UP or DOWN button first, then
press the VOLUME + or - button.
(Pressing the VOLUME + or - button will only
alter the programme position number.)
6 Select "SEARCH" by pressing the
Programme UP or DOWN button.
MODE
SEARCH
POSITION
SKIP
MEMORY
Semi-Auto Tuning:
Press and release the VOLUME + or - button
to search for required TV station. Once a
station is located, tuning will automatically
stop. Continue till desired channel is located.
MODE
SEARCH
POSITION
SKIP
MEMORY
Manual Tuning :
Press and hold the VOLUME + or - button to
search for required TV station.
MODE
SEARCH
POSITION
SKIP
MEMORY
BACK
EXIT The VOLUME + button will move tuning toward
the higher frequencies, and the VOLUME -
button will move tuning toward the lower
frequencies.
7 Once desired channel is located, select
"MEMORY" by pressing the
Programme UP or DOWN button.
8 Press the VOLUME + or - button to
enter the desired channel into
Programme Position 6.
SKIP
MEMORY
SELECT
To pre-set other Programme Positions, repeat
steps 5-8.
9 Press the MENU button to return to
normal TV display.
SEMI
START
6
OFF
- -
SEMI
IIIII------------
6
OFF
- -
MANUAL
IIIII-----------
6
OFF
- -
OFF
OK
ADJUST BACK
P P
EXIT
M
13