Get Started; Installation; Set Up Your Scanner - Argox AI-6800 User Manual

2

Get started

This chapter provides information about how
to install, connect and use your scanner to do
your work.

2.1 Installation

This section describes how to set up your
scanner.

2.1.1 Set up your scanner

1. Plug the RJ45 connector into your
2. Connect the USB or the RS-232 connector
3. Turn on your computer. It detects your
4. To test your scanner, start a text
scanner's RJ45 port, until you hear a click.
to your computer.
Note If you've purchased the power
supply, connect it to the RS-232 cable and
the wall outlet.
scanner automatically.
processing program like Notepad or Word.
Scan a bar code and see if the data can
be sent to your computer. If it's
successful, you'll hear a beep and the bar
code data shows in the program.
6