Table of Contents
Advertisement
Registration and Operation
Registration and Operation of the 2603 Accessory Handset
Your 2621 system can operate up to four Handsets.
The accessory Handset consists of the following:
Setup of the 2603 Accessory
Handset
1.
Plug the AC power adapter into
an electrical outlet, then the DC
connector into the bottom of the
Charger Unit.
2.
Remove the Handset battery
compartment cover by pressing
on the indent and sliding
downward.
3.
Place the new battery in the
Handset, with the metal contacts
aligned with the charge contacts in
the battery compartment.
4.
Replace the battery compartment
cover by sliding it upward.
5.
Place the Handset in the Charge
Cradle, and allow it to charge for
12 hours. After the initial charge,
a maintenance charge of 10
hours should be sufficient.
10
Advertisement
Table of Contents
