Displaying And Maintaining Mpls L2Vpn - H3C S5500-HI Series Mpls Configuration Manual

Step
4. Create
connection.
Resetting L2VPN BGP sessions
When the configuration that affects BGP routing changes, to validate the new configuration by resetting
BGP sessions, perform the following task in user view:
Task
Reset L2VPN BGP sessions.

Displaying and maintaining MPLS L2VPN

Task
Display information about CCC
connections.
Display information about
specified L2VPN VC interfaces.
Display information about static
VCs.
Display information about Martini
VCs.
Command
connection [ ce-offset ce-id ] interface
a Kompella
interface-type interface-number
[ tunnel-policy tunnel-policy-name ]
Command
display ccc [ ccc-name ccc-name |
type { local | remote } ] [ | { begin
| exclude | include }
regular-expression ]
display l2vpn ccc-interface vc-type
{ all | bgp-vc | ccc | ldp-vc |
static-vc } [ up | down ] [ | { begin
| exclude | include }
regular-expression ]
display mpls static-l2vc [ interface
interface-type interface-number
[ service-instance instance-id ] ] [ |
{ begin | exclude | include }
regular-expression ]
display mpls l2vc [ interface
interface-type interface-number
[ service-instance instance-id ] |
remote-info ] [ | { begin | exclude
| include } regular-expression ]
Command
reset bgp l2vpn { as-number | ip-address | all |
external | internal }
207
Remarks
The ce-offset ce-id option
determines whether the
connection is a local
connection or a remote
connection. If the specified CE
is connected to the same PE as
the local CE, the connection is
local connection. Otherwise,
the connection is a remote
connection.
The interface interface-type
interface-number option
specifies a PE-CE interface of
the PE. By specifying the
interface, you bind the AC link
of the interface to the Kompella
connection to be created.
Remarks
Available in any view
Available in any view
Available in any view
Available in any view