Configuring Hovpn - H3C S5500-HI Series Mpls Configuration Manual

Hide thumbs Also See for S5500-HI Series:

Table of Contents

Request time out

--- 130.1.1.1 ping statistics ---

5 packet(s) transmitted

0 packet(s) received

100.00% packet loss

Configuring HoVPN

Network requirements

There are two levels of networks, the backbone and the MPLS VPN networks, as shown in

SPEs act as PEs to allow MPLS VPNs to access the backbone.

UPEs act as PEs of the MPLS VPNs to allow end users to access the VPNs.

Performance requirements for the UPEs are lower than those for the SPEs.

SPEs advertise routes permitted by the routing policies to UPEs, permitting CE 1 and CE 3 in VPN

1 to communicate with each other and forbidding CE 2 and CE 4 in VPN 2 to communicate with

Figure 84 Network diagram

Configuration procedure

Configure UPE 1:

172.1.1.1/24

172.1.1.2/24

180.1.1.1/24

172.2.1.1/24

172.2.1.2/24

180.1.1.2/24

S10500 series