Table of Contents
Advertisement
5.4 VxComm communication test
Step 1: Connect M-4132 Server, Client and PC, as shown below.
Figure 60: Communication Architecture
Step 2: Configure M-4132 Server's Port1 to PC's Com2 by VxComm
Utility, please refer to section 5.3 for detail.
Step 3: Set "Local Port" = VxComm, "Remote Port" = RS232, select M-
4132 Client and then click "Pair Connection" button to connect
M-4132 Server and Client by web page of M-4132 Server.
Figure 61: Web page settings
M-4132 User Manual (Version 1.60, May/2014)
PAGE：56
Advertisement
Table of Contents
