Communication Port - ICP DAS USA M-4132 User Manual

Name Status
SA1 flash
flash slowly
SA2
flash fast
on
flash slowly (SA1
SA1
& SA2 flash at
&
the same time)
SA2
flash (SA1 &
SA2 alternate
flash)

2.5 Communication Port

M-4132 uses several communication ports of Ethernet, as shown in the
below. If the user connects M-4132 client by "ETM operation mode", the
communication ports will include the ports of "ETM configuration file".
Table 9: Communication Port
Service
Web Server
FTP Server
Telnet Server
SSH Server
E-mail function
VSoIP function
VxComm function
VPN function
M-4132 User Manual (Version 1.60, May/2014)
It is receiving com port data via Ethernet.
Server: The Ethernet is initial ok and wait for the client to login.
Client: The Ethernet is initialized ok and login completely. It has
readied to enable voice and com port data connection by the server.
It is sending or receiving voice data via Ethernet.
There are happening some errors. (Client: Please check settings about
IP & DNS)
It is trying to establish the connection with the server/client. If it can't
connect to the server/client for a long time, please check that the M-
4132 has available network settings and is working well on Ethernet.
Server: Receive the request to connect from the client.
Client: Request server to connect.
Port number
80
21
23
22
587
443
10000, 10001
1194
Description
note
default
default
PAGE：15