ICP DAS USA M-4132 User Manual page 19

Step 3: test connection
1. Click "start->Run..."
Figure 15: click "start->Run..."
2. Key in "cmd" and then click "OK" button
Figure 16: key in "cmd" and then click "OK" button
3. key in "ping 192.168.1.217" and click "Enter". If the response
message shows "Request timed out"(figure 17), it means the network
settings between PC and the module are not correct. Please check the
network is available and the settings are all correct.
M-4132 User Manual (Version 1.60, May/2014) PAGE：19