2
Installation
2.1
Unpacking and Inspection
1.
2.
3.
4.
5.
2.2
Mounting
The sensor has been designed to be located in industrial process environments.
Temperature and pressure limitations must not be exceeded at any time. A Caution label
regarding this matter is attached to the sensor with the cable. Please do not remove this
label..
Figure 2-1:
Instruction Manual
Inspect the outside of the carton for any damage.
If damage is detected, contact the carrier immediately.
Inspect the hardware.
Make sure all the items in the packing list are present and in good condition.
Notify the factory if any part is missing.
Rosemount 389 Sensor dimensional drawing
Installation
7