Pacific 549401 Parts & Operating Manual page 9

MAINTENANCE
To change or clean the exhaust filter:
1. Unplug the vacuum cleaner.
2. Detach the exhaust filter holder from the bottom of the unit (See Figure 8). DO NOT THROW AWAY THE FILTER HOLDER.
3. Remove the exhaust filter from the plastic holder and shake or brush dirt from filter (See Figure 8).
4. Replace exhaust filter in plastic holder and place into vacuum.
To change HEPA filter:
1. Unplug the vacuum cleaner.
2. Remove filter cap on the top of HEPA filter (See Figure 9).
3. Remove HEPA filter from the dust compartment (See Figure 9).
4. Insert a new filter and replace filter cap, refit cloth bag, paper bag and replace lid.
NOTE: HEPA filters CANNOT be washed and used again.
Exhaust filter
Filter holder
OPERATING PROCEDURES
Figure 8 - Removal of exhaust
filter
Figure 9 - Removal of HEPA filter
9
HEPA filter
Filter cap