HPE FlexNetwork MSR Series Comware 5 Security Configuration Manual page 51

Task
Specifying the shared keys for secure HWTACACS communication
Specifying a VPN for the HWTACACS scheme
Setting the username format and traffic statistics units
Specifying the source IP address for outgoing HWTACACS packets
Setting HWTACACS timers
Displaying and maintaining HWTACACS
Creating an HWTACACS scheme
The HWTACACS protocol is configured on a per scheme basis. Before you perform other
HWTACACS configurations, create an HWTACACS scheme and enter HWTACACS scheme view.
You can configure up to 16 HWTACACS schemes.
To create an HWTACACS scheme and enter HWTACACS scheme view:
Step
1. Enter system view.
2. Create an HWTACACS scheme and
enter HWTACACS scheme view.
You can delete an HWTACACS scheme only when it is not referenced.
Specifying the HWTACACS authentication servers
You can specify one primary authentication server and one secondary authentication server for an
HWTACACS scheme. When the primary server is not available, the secondary server is used. In a
scenario where redundancy is not required, specify only the primary server.
An HWTACACS server can function as the primary authentication server of one scheme and as the
secondary authentication server of another scheme at the same time. You cannot specify the same
IP address as both the primary and the secondary authentication servers in a scheme.
To specify HWTACACS authentication servers for an HWTACACS scheme:
Step
1. Enter system view.
2. Enter HWTACACS scheme
view.
3. Specify HWTACACS
authentication servers.
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
•
Specify the primary
HWTACACS authentication
server:
primary authentication
ip-address [ port-number | key
[ cipher | simple ] key |
vpn-instance
vpn-instance-name ] *
•
Specify a secondary
HWTACACS authentication
server:
secondary authentication
ip-address [ port-number | key
[ cipher | simple ] key |
vpn-instance
vpn-instance-name ] *
38
Remarks
Required.
Optional.
Optional.
Optional.
Optional.
Optional.
Remarks
N/A
Not defined by default.
Remarks
N/A
N/A
Configure at least one
command.
No authentication server is
specified by default.