Configuring A Psk; Ignoring Authorization Information From The Server; Displaying And Maintaining Port Security - HPE FlexNetwork MSR Series Comware 5 Security Configuration Manual

Step
2. Enter interface view.
3. Enable key negotiation of the
11key type.

Configuring a PSK

A PSK pre-configured on the device is used to negotiate the session key between the user and the
device.
To configure a PSK:
Step
1. Enter system
view.
2. Enter interface
view.
3. Configure a PSK.

Ignoring authorization information from the server

You can configure a port to ignore the authorization information received from the server (an
RADIUS server or the local device) after an 802.1X user or MAC authentication user passes
authentication.
To configure a port to ignore authorization information from the server:
Step
1. Enter system view.
2. Enter interface view.
3. Ignore the authorization
information received from
the authentication server.

Displaying and maintaining port security

Task
Display port security configuration
information, operation
information, and statistics about
one or more ports or all ports.
Display information about secure
MAC addresses.
Command
interface interface-type
interface-number
port-security tx-key-type 11key
Command
system-view
interface interface-type interface-number
port-security preshared-key
{ pass-phrase | raw-key } [ cipher | simple ]
key
Command
system-view
interface interface-type
interface-number
port-security authorization
ignore
Command
display port-security [ interface interface-list ]
[ | { begin | exclude | include }
regular-expression ]
display port-security mac-address security
[ interface interface-type interface-number ]
[ vlan vlan-id ] [ count ] [ | { begin | exclude |
include } regular-expression ]
137
Remarks
N/A
Disabled by default.
Remarks
N/A
N/A
By default, no PSK is configured.
Remarks
N/A
N/A
By default, a port uses the
authorization information received
from the authentication server.
Remarks
Available in any
view.
Available in any
view.