Configuring Hwtacacs Schemes - HPE FlexNetwork MSR Series Comware 5 Security Configuration Manual

Step
2. Enable the trap function for
RADIUS.
Enabling the RADIUS client service
To receive and send RADIUS packets, enable the RADIUS client service on the device. If RADIUS is
not required, disable the RADIUS client service to avoid attacks that exploit RADIUS packets.
To enable the RADIUS client service:
Step
1. Enter system view.
2. Enable the RADIUS client
service.
Displaying and maintaining RADIUS
Task
Display the configuration of RADIUS
schemes.
Display the RADIUS packet statistics.
Display information about buffered
stop-accounting requests for which no
responses have been received.
Clear RADIUS statistics.
Clear the buffered stop-accounting
requests for which no responses have
been received.

Configuring HWTACACS schemes

You cannot remove the HWTACACS schemes in use or change the IP addresses of the HWTACACS
servers in use.
HWTACACS configuration task list
Task
Creating an HWTACACS scheme
Specifying the HWTACACS authentication servers
Specifying the HWTACACS authorization servers
Specifying the HWTACACS accounting servers and the relevant parameters
Command
radius trap
{ accounting-server-down |
authentication-error-threshold |
authentication-server-down }
Command
system-view
radius client enable
Command
display radius scheme
[ radius-scheme-name ] [ | { begin | exclude |
include } regular-expression ]
display radius statistics [ | { begin | exclude
| include } regular-expression ]
display stop-accounting-buffer
{ radius-scheme radius-scheme-name |
session-id session-id | time-range start-time
stop-time | user-name user-name } [ | { begin
| exclude | include } regular-expression ]
reset radius statistics
reset stop-accounting-buffer
{ radius-scheme radius-scheme-name |
session-id session-id | time-range start-time
stop-time | user-name user-name }
37
Remarks
Disabled by default.
Remarks
N/A
Optional.
Enabled by default.
Remarks
Available in any
view.
Available in any
view.
Available in any
view.
Available in user
view.
Available in user
view.
Remarks
Required.
Required.
Optional.
Optional.