Mount The Camera Unit To The Base; Connection For Adjustment Of The Camera - JVC TK-C205VP Instructions Manual

Mount the Camera unit to the Base

Mount the camera unit to the base after filling the conduit hole and mounting holes with
sealing agent.
Sealing agent

Connection for Adjustment of the Camera

Temporarily used for making various adjustments while the camera remains in the
installed location.
IRIS
LEVEL Volume
Fill using sealing agent
Completely fill the conduit hole using seal-
ing agent. Also fill the mounting holes when
not in use.
MEMO
The sealant should be GE silicone or equal.
Not filling the holes completely with seal-
ing agent may cause moisture to enter,
clouding the lens and dome cover as a
result. Be sure to completely close the
holes.

Mount the camera unit to the base

Fit the camera unit within the base and
securely fasten the screws in the order of
and .
Setting switch
Adjustment
button
75Ω termination
disconnected
CAUTION
Monitor TV
E-13