Attach The Dome Cover - JVC TK-C205VP Instructions Manual

Attach the Dome cover

The dome cover is mounted on the base.
Safety cable
1.
Remove dirt and soiling on the dome
cover. Otherwise, such dirt and soiling
may appear in the camera image.
2.
Set the dome cover to the unit by
aligning the 3 marks on the base and
dome cover (I, II and III).
3.
Securely tighten the special screws (3
locations) using the provided wrench.
4.
Remove the protective sheet affixed on
the dome cover.
CAUTION
• Be sure that dome cover is firmly at-
tached. Improper attachment could re-
sult in the cover dropping down.
• Be sure to not pinch the safety cable
between the dome cover and base. Wa-
ter proof and dustproof features may not
perform properly as aresult.
• Insert the safety cable of the dome cover
in the space between the base and cam-
era unit.
E-15