Table of Contents
Advertisement
UNITED STATES OF AMERICA
In this country, the standards which regulate the use of Class IV laser products concerning labeling and
safety interlocks must be observed.
OFFICE OF COMPLIANCE (HFZ-312)
CENTRE FOR DEVICES AND RADIOLOGICAL HEALTH
US DEPARTMENT OF HEALTH & HUMAN SERVICES
8757 GEORGIA AVENUE
SILVER SPRING, MD 20910
TEL.: (301) 427-1172
EUROPE
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC STANDARD
EMISSION SAFETY OF LASER PRODUCTS, EQUIPMENT
CLASSIFICATION, REQUIREMENTS AND USER'S GUIDE.
Safety devices and protections supplied by HITACHI will not necessarily meet requirements of the
Customer's Local Factory Inspector, Laser Safety and Country Regulations and no warranty or
representation is given or made that they comply with any statutory or other requirement. No liability is
accepted by HITACHI in this respect.
1.2.1. SAFETY SWITCHES
The laser coding system includes the safety switch (interlock).
• Lock control. Consist of a micro-switch located on the protective cover of the laser tube. When this
cover is removed while the system is working, the message "Laser Locked" will be displayed on the
laser marking system screen and the laser is deactivated.
1-3 •LASER SAFETY STANDARDS
Advertisement
Table of Contents
