Download  Print this page

Operation From External And Extension Telephones; Using A Cordless External Telephone; Using Remote Codes - Brother MFC-J6910DW Basic User's Manual

Hide thumbs

Advertisement

Operation from external and
extension telephones
If you answer a fax call on an extension or an
external telephone, you can make your
machine take the call by using the Remote
Activation Code. When you press the Remote
Activation Code l 5 1, the machine starts to
receive the fax.
If the machine answers a voice call and fast
double-rings for you to take over, use the
Remote Deactivation Code # 5 1 to take the
call at an extension telephone. (See F/T Ring
Time (Fax/Tel mode only) on page 38.)
If you answer a call and no one is on
the line:
You should assume that you're receiving a
manual fax.
Press l 5 1 and wait for the chirp or until the
LCD shows Receiving, and then hang up.
Note
You can also use the Fax Detect feature to
make your machine automatically take the
call. (See Fax Detect on page 39.)
Telephone and external devices
Using a cordless external
telephone
6
Once the base unit of the cordless telephone
has been connected to the same telephone
line as the machine (see External and
extension telephones on page 46), it is easier
to answer calls during the Ring Delay if you
carry the cordless handset around with you.
If you let the machine answer first, you will
have to go to the machine so you can press
Hook to send the call to the cordless handset.

Using remote codes

Remote Activation code
6
If you answer a fax call on an extension or
external telephone, you can tell your machine
to receive it by dialling the Remote Activation
Code l 5 1. Wait for the chirping sounds then
replace the handset. (See Fax Detect
on page 39.)
If you answer a fax call at the external
telephone, you can make the machine
receive the fax by pressing Mono Start and
choose Receive when you select the Fax
Mode to Advanced Mode. (See Setting the
Fax Logic (sending and receiving sequence)
on page 10).
Remote Deactivation Code
If you receive a voice call and the machine is
in Fax/Tel mode, it will start to sound the F/T
Ring (fast double-ring), after the initial ring
delay. If you pick up the call on an extension
telephone you can turn the F/T Ring off by
pressing # 5 1 (make sure you press this
between the rings).
If the machine answers a voice call and fast
double-rings for you to take over, you can
take the call at the external telephone by
pressing Hook.
6
6
6
6
6
47

Advertisement

Table of Contents

   Also See for Brother MFC-J6910DW

   Related Manuals for Brother MFC-J6910DW

Comments to this Manuals

Symbols: 0
Latest comments: