Brother MFC-J6910DW Basic User's Manual page 83

Error Message
Hub is Unusable.
Image Too Long.
Image Too Small.
Ink Absorber Full
Ink Absorber NearFull
Ink low
Low Temperature
Media Error
Media is Full.
No Caller ID
Cause
A Hub or USB Flash memory drive
with Hub has been connected to the
USB direct interface.
The proportions of your photo are
irregular so effects could not be
added.
The size of your photo is too small to
trim.
Internal servicing required.
This problem may be caused by the
use of cartridges other than Brother
Original cartridges or the refilling of
empty cartridges with ink from other
sources. If damage is caused to the
print head or other parts of this
machine as a result of using other
brands of ink or ink cartridges, any
repairs required as a result may not be
covered by the warranty.
The ink absorber box or flushing box is
near full.
One or more of the ink cartridges are
near the end of their life. If a sending
machine has a color fax to send, your
machine's "handshake" will ask that
the fax be sent as monochrome. If the
sending machine has the ability to
convert it, the color fax will be printed
at your machine as a monochrome
fax.
The print head is too cold.
The memory card is either corrupted,
incorrectly formatted, or there is a
problem with the memory card.
The memory card or USB Flash
memory drive you are using has no
available space or already contains
999 files.
There is no incoming call history. You
did not receive calls or you have not
subscribed to the Caller ID service
from your telephone company.
Troubleshooting
Action
A Hub or USB Flash memory drive
with Hub are not supported. Unplug
the device from the USB direct
interface.
Choose a regularly proportioned
image.
Choose a larger image.
Call Brother Customer Service / your
Brother dealer.
Call Brother Customer Service / your
Brother dealer.
Order a new ink cartridge. You can
continue printing until the LCD shows
Cannot Print. (See Replacing the
ink cartridges on page 67.)
Allow the machine to warm up.
Put the card firmly into the slot again to
make sure it is in the correct position.
If the error remains, check the media
drive (slot) of the machine by putting in
another memory card that you know is
working.
Your machine can only save to your
memory card or USB Flash memory
drive if it contains less than 999 files.
Try deleting unused files to free some
space and try again.
If you want to use the Caller ID feature
call your telephone company. (See
Caller ID (Caller IDentification) (not
available in certain area) on page 43.)
B
75