Connect Speakertrack 60 To Codec C90 - Cisco TelePresence Precision 60 Manual

Cisco TelePresence Precision 60 and SpeakerTrack 60
Contents

Connect SpeakerTrack 60 to Codec C90

• Connect the video cables to the codec's camera inputs
(HDMI 1 and 2).
• Connect Ethernet to the codec's 2nd Ethernet port.
• Connect to power.
For further information about camera assembly and cabling,
refer to the SpeakerTrack 60 installation guide:
http://www.cisco.com/go/telepresence/docs
When using a SpeakerTrack 60 with a C Series codec, the
codec cannot be controlled with a Cisco Remote Control
TRC5. Instead, a Cisco TelePresence Touch 8 user interface
or an external control device must be used.
HDMI 1,2
D15296.03 Cisco TelePresence Precision 60 and SpeakerTrack 60, APRIL 2016.
Introduction Physical interface
RJ45
Power
(100-240 V , 50/60 Hz)
AC
Connecting the camera Connecting the camera
Power
adapter
Always use the provided power cable
and adapter (12 V , minimum 3 A).
DC
14
Camera guide
Factory reset Appendix
Copyright © 2016 Cisco Systems, Inc. All rights reserved.