By Blum-Novotest - BLUM TC60 Operating Instructions Manual

EC Declaration of Incorporation
acc. to the EC Machine Regulations 2006/42/EC in the edition from 17 May.2006
We hereby confirm that the subsequently following components are defined for the
installation into other machines and that they are in accordance with the following
safety requirements of the EC regulations.
Commissioning is not allowed until it is ascertained that the machines, in which the
components are installed, are in accordance with the EC regulations 2006/42/EC.
The relevant technical information is compiled acc. to annex VII part B and, where
appropriate, we will send the information concerning the components to the different
countries. The industrial property rights of Blum-Novotest GmbH will remain unaffected.
Component name:
Safety requirements
2006/42/EG, Annex I
Applied standards:
EC-Regulations:
Applied harmonized standards:
Applied national standards:
Authorised presentative for technical information:
© by Blum-Novotest 2010
P03.6000 / P06.3300
Probe for workpiece measurement
1.5.1
2004/108/EG
2006/95/EG
1999/5/EG
EN61000-6
EN60204-1
EN ISO 12100
EN 300 328
EN 301 489-17
EN 60950-1:2001
DIN VDE 0100
DIN VDE 0113
Blum-Novotest GmbH
Kaufstr. 14
88287 Gruenkraut, Germany
27