Mounting And Commissioning; Batterie Einsetzen / Wechseln - BLUM TC60 Operating Instructions Manual

Mounting and Commissioning

3. Mounting and Commissioning

3.1 Batterie einsetzen / wechseln

Empfohlener Batterietyp:
Type
mAh
Contin.
operation
5% Use
Standby
Order number
CAUTION
1. Clean probe carefully and remove battery cover
2. Exchange battery - take care of polarity!
3. Install battery cover straight (check O-Ring and grease if necessary)
4. Automatic display of the basic adjustments (chap. 3.6)
Fig. 3.1
10
Ultralife Lithium U9VL-J
1200
ca. xxx h
ca. xxx Tage
ca. xxx Tage
980702003
Dispose batteries acc. to legal requirements.
Risk of short-circuit
Be careful to correct position of gasket.
Keep battery space clean and dry.
© by Blum-Novotest 2010