Lcd Transmitter Operation; Button Lock Lcd Transmitter; Led Display; Chirp Indicators - Auto Page RF-520LCD Operation Manual

LCD DISPLAY TRANSMITTER OPERATION ONLY:
Transmitter Button
-
(C)
- -
(C)
(1 second)
- -
- +
(2 sec)
BUTTON LOCK:
It is useful if you want to disable the transmission function of the LCD remote control
to temporarily prevent from any inadvertent pressing of buttons by others.
The 2-way remote control transmitter:
Press the button first, within 3 seconds press and
hold the ( ) button for 2 seconds to activate or cancel
the button lock function.
The icon will be displayed on the LCD screen to
confirm that the LCD remote transmitter is in the "Button
.
Lock" mode

LED display:

LED Function
Off Disarmed
Slow Flash Armed
Fast Flash Passive Arming
On (Solid) Valet Mode

CHIRP INDICATORS:

Chirp Function
1 chirp Arm
2 chirps Disarm
3 chirps Defective Reminder
4 chirps Disarm / Triggered
6 chirps Car Locator
System Function
System's Trigger Check
System's Status Check
LCD screen lamp turns on
for 5 seconds.
Clear the Flash Icon and
Melody Sound on the LCD
Screen Transmitter
Switching code for 2nd / 1st
Car Operation
LED
2 flashes... pause
3 flashes... pause
4 flashes... pause
5 flashes... pause
PARKING LIGHT:
Parking light
1 flash
2 flashes
3 flashes
12 flashes
5
Remark
Press within 3 seconds
Press within 3 seconds
Press and hold for 1 second
Press within 3 seconds
Press within 3 seconds
Function
Zone 1 / Warn-Away Trigger
Zone 2 / Trigger on Trunk/Hood
Zone 3 / Trigger on Door Switch
Zone 4 / Trigger on Shock Sensor
Zone 5 / Trigger on Ignition Switch
Function
Arm
Disarm
Disarm / Triggered
Car Locator