Transmitter Operation; Active Arming - Lock & Arm - Auto Page car-Pro CPX-2600 Operation Manual

TRANSMITTER OPERATION

Transmitter Button
Button
– Button
Button
Button for 3 seconds
Button
– Button
Button
Button for 2 seconds
Button for 3 seconds
+ Button
+ Button for 1 seconds
ACTIVE ARMING – LOCK & ARM:
1. Press button on transmitter.
The siren will chirp once and the parking lights will flash once indicating
2.
that the system is now armed. The vehicle doors will lock upon arming
when interfaced with the security system.
Note: Defective sensor reminder: If the siren sounds 3 chirps, then you
have left a door, trunk, or hood lid ajar. (See Feature "I - 3 Programming)
SILENT ARMING / DISARMING: Press the
transmitter to arm or disarm your security system, No chirp sound will be
heard; arm / disarm confirmation will be through the vehicles parking lights
only.
System Function
Arm / Lock door
Arm and Delete
Optional Sensor
Car Locator
Panic function
Disarm & Unlock
Door
Two Steps Door
Unlock & Disarm
System
Car Locator
Pop Trunk Release
Panic function
Silent Arm / Disarm
Activate Car-Jacking
+ button together on the
Remark
Press twice.
System in Armed.
Press 3 seconds
Press twice within 3
seconds.
Press 2 seconds
If the H2/6 Gray Wire
is not Trunk release
Output (See Alarm
Feature III-2)
Ignition in "off"
position.
Ignition in "on"
position.