Transmitter Operation; Active Arming - Lock & Arm; Passive Arming - Auto Page Professional Vehicle Security System RF-315 Operation Manual

Professional vehicle security system
Table of Contents

Advertisement

TRANSMITTER OPERATION:

Transmitter
System Function
Button
Lock Doors & Arm System
Panic function
Car Locator
-
Arm and Delete The 2 Stage Shock
Sensor
+
Silent Arming / Disarming
Unlock Doors & Disarm System
-
Two Steps Door Unlock & Disarm
System
Trunk Release (Channel 2)
-
Passive Arming By-pass
Silent Arming / Disarming or 3
Switching code For 2nd Car
II
Operation.
ACTIVE ARMING – LOCK & ARM:
1. Press
button on transmitter.
2. The siren will chirp once and parking light will flash once indicating that the system is now
armed. The vehicle doors will lock upon arming when interfaced with the security system.
Note: Defective sensor reminder: If the siren sounds 3 chirps, then you have left a door,
trunk, or hood lid ajar.
SILENT ARMING / DISARMING: Press the
your security system with no chirp sound heard; arm / disarm confirmation will be through the
vehicles parking lights only.
SHOCK SENSOR / OPTIONAL SENSOR BY-PASS: Press the
twice within 3 seconds will arm the security system, by-pass the shock sensor or the optional
sensor connected to 4 pin plug. The system will chirp one additional time to confirm the
sensor bypass mode was activated. The sensor bypass feature is programmed to activate for
one arming cycle only. The security system will return to normal operation during the next
arming cycle.

PASSIVE ARMING:

Active arming / disarming is controlling your security system via the remote transmitter. This
security system is equipped with an optional Passive Arming feature, which allows the
security system to arm 30 seconds after the last door is closed. Operation is as follows.
1. Turn the ignition to the "OFF" position and exit the vehicle. After all entrances are closed,
the security system LED will flash fast for 30 seconds. If you reopen any door / hood /
trunk, the security system LED will stop flashing. It will begin flashing again once all vehicle
entrances are closed.
2. After 30-second timer has elapsed, the security system will automatically "ARM". The siren
will chirp [1] time and the parking lights will flash [1] time.
Remark
Press and Hold for 3 seconds
Under armed mode
Press twice within 3 seconds
Ignition in "off" position.
Press twice within 3 seconds.
Press and Hold for 2 seconds
While the system Disarmed.
rd
ch
For regular remote transmitter Only
button on the transmitter to arm or disarm
button on the transmitter
2

Advertisement

Table of Contents
loading

Table of Contents

Save PDF