1. Manuals
  2. Brands
  3. Auto Page Manuals
  4. Car Alarm
  5. AutoPage RF-501
  6. Operation instructions manual

Auto Page AutoPage RF-501 Operation Instructions Manual

Autopage rf-501 operation instructions
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
RF-501
OPERATION INSTRUCTIONS

Advertisement

Table of Contents
loading

Related Manuals for Auto Page AutoPage RF-501

Summary of Contents for Auto Page AutoPage RF-501

  • Page 1 RF-501 OPERATION INSTRUCTIONS...
  • Page 2 !!NOTICE!! THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. FEDERAL COMMUNICATION COMMISSION RULES AND REGULATIONS PROHIBIT THE ADJUSTMENT OF THE TRANSMITTER PORTION OF THIS SYSTEM BY UNLICENSED PERSONNEL.
  • Page 3 CONGRATULATIONS on your purcahse of the RF-301 vehicle security system. AutoPage, Inc. is one of the companies in the United States with the longest history and experience in vehicle security, and a wholly owned subsidiary of Iwata Electric Co., of Tokyo, Japan. Iwata has been an industry leader for 40 years, establishing a reputation for ingenuity in its engineering capability and innovative cxommunication products.

  • Page 4: Transmitter Operation

    RF-501 OPERATION INSTRUCTIONS A. TRANSMITTER OPERATION 1. ARM/DISARM TO ARM THE RF-501 Press the GREEN button once to arm. The siren will chirp one (1) time, the lights will flash, and all doors will lock. TO DISARM THE RF-501 Press the green button once to disarm. The siren will chirp two (2) times, the lights will flash, and all doors will unlock.
  • Page 5 3. DELETING THE PRE-WARNING SENSOR CIRCUIT (IF INSTALLED) The RF-501 offers an option to pre-warn possible violators with siren chirps before triggering the alarm. The alarm will trigger on the third violation within 15 seconds. To delete the pre-warning sensor, press the GREEN button again within 5 seconds after arming.
  • Page 6 the usual manner. The chirp signal will be silenced only for this particular operation. The sequence must be repeated each time if it is desired to cancel the arm/disarm chirp signal. 2. Upon deleting the arm/disarm chirp signal, arm/disarm verification may be made by watching the vehicle's lights flash.

  • Page 7: Override Function

    and disarms the alarm. B. LED STATUS INDICATOR OPERATION 1. LED OFF= The RF-501 is disarmed or in the valet mode. 2. LED CONSTANT ON= Indicates open trigger circuit. 3. LED FAST FLASHING= Passive arming timer is counting down. 4. LED FLASHING= The RF-501 is armed. 5.

  • Page 8: Passive Arming

    The RF-501 may be placed into the VALET (stand-by) mode to allow for vehicle service, car washing, or attendant parking without self arming after the ignition is switched off, and without leaving the RF-501 transmitter with unauthorized individuals. To enter the VALET mode, the vehicle ignition must be in the "ON" position;...

  • Page 9: Manual Arming

    NOTE: If the optional relays have been installed to control the vehicle power door locks, the locks will automatically lock ten (10) seconds after the PASSIVE arming cycle is completed. If remote door lock/unlock is installed and automatic locking in the passive mode is not desired, then the automatic door lock in passive mode can be deleted by switching dip switch #3 in the main unit to OFF.

  • Page 10: Panic Function

    Each time the RF-501 is disarmed domelights will turn on for 60 seconds. Entering the vehicle after disarming, and switching on the ignition will turn the dome lights off before the 60 second time limit has expired. NOTE: If the domelight supervision installation procedure (Section F, Page 15) is not installed as shown, then the ignition control door lock system may not work properly in your vehicle.
  • Page 11 instantly, and the lights will flash. 2. If optional glass, shock or motion sensors have been installed, rearm the RF-501 and test according to the directions of the particular sensor installed. If triggered in the armed condition, the RF-501 will sound its siren and flash the lights for 60 seconds;...
  • Page 12 security feature. If any transmitter is lost or stolen, enter the programming mode and re-program existing transmitters. Transmitters can only be programmed by entering the programming mode. Existing codes will remain in memory if power to the RF-501 is disconnected. To program the RF-501 transmitters, follow the directions as written below, IN THEIR EXACT ORDER! 1.
  • Page 13 7. The RF-501 can learn four transmitter codes. If later optional third and forth transmitters are to be programmed, follow sequence 1 through 6 and re-program ALL existing transmitters. N. PROGRAMMING THE REMOTE TRANSMITTER FOR SECOND & THIRD VEHICLES The RF-501 transmitters are capable of controlling separately installed RF-501 or RF-30 alarm systems in two or three vehicles.
  • Page 14 Note: Here, the first transmitter is assumed to be the primary transmitter of VEHICLE #1, and the second transmitter is assumed to be the primary transmitter of VEHICLE #2. TRANSMITTER #1 TRANSMITTER #2 2. TWO VEHICLE OPERATION WITH TRUNK RELEASE FEATURE INSTALLED In this section the trunk release function is assumed to have been installed in VEHICLE #1 only.
  • Page 15 Three vehicle operation is accomplished in the same manner as two vehicle operation. Use the chart below to program three vehicles to operate from one transmitter. VEHICLE #1 TRANSMITTER #1 GREEN BUTTON GREEN BUTTON TRANSMITTER #2 BOTH BUTTONS BLACK BUTTON TRANSMITTER #3 BLACK BUTTON BOTH BUTTONS...
  • Page 16 AUTOPAGE ALARM ACCESSORIES AP-4000DX Paging System Vehicle security paging was originated by AutoPage over 15 years ago. The "SHADOW" is our latest version providing a full four watts of output power to signal a handsome belt-clip paging receiver indicating your RF-501 has been triggered, even if you cannot hear the siren.
  • Page 17 RK-1 Relay Kit A pre-wired relay and socket for interfacing power lock systems with the RF-501, as well as the starter interrupt function. It may also be used with the AP4000DX paging system to raise and power many automatic power antennas. As an option to the standard single tone siren package, a six tone siren is available at additional cost.
  • Page 18 LIMITED LIFETIME WARRANTY PROVISIONS (U.S. and Continental U.S. Only) 1. AutoPage, Inc. WARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery. Your AutoPage equipment is guaranteed for "life" to the original purchaser/user of the equipment under the following conditions: If the product proves defective (according to AutoPage's testing) within the first year, the defective unit may be exchanged or repaired free of charge.
  • Page 19 7 AutoPage shall not be liable, under the foregoing WARRANTIES or otherwise, for: Any personal injury of any kind to the purchaser, its employees or agents or anyone else whomsoever resulting directly or indirectly from the use or presence of the equipment or parts; Consequential damages of any kind;...
  • Page 20 This WARRANTY CARD is for your record. However, AutoPage reserves the right to request you to submit t his WARRANTY CARD which must have complete information to receive warranty service. Please keep this card in a secured place. AUTOPAGE WARRANTY SERVICE CARD Model RF-501 CUSTOMER TO COMPLETE Mr/Mrs/Ms...
  • Page 21 1815 W. 205th St. #101 Torrance, CA 90501...
  • Page 22 310-618-2002...

Table of Contents

Save PDF