Table of Contents
Advertisement
TRANSMITTER OPERATION
Transmitter Button
Button
–
Button
Button
Button for 3 seconds
Button
–
Button
Button for 2 seconds
+
Button
+
Button for 1 seconds
II
ACTIVE ARMING – LOCK & ARM:
1. Press
button on transmitter.
The siren will chirp once and the parking lights will flash once indicating
2.
that the system is now armed. The vehicle doors will lock upon arming
when interfaced with the security system.
Note: Defective sensor reminder: If the siren sounds 3 chirps, then you
have left a door, trunk, or hood lid ajar.
SILENT ARMING / DISARMING: Press the
transmitter to arm or disarm your security system, No chirp sound will be
heard; arm / disarm confirmation will be through the vehicles parking lights
only.
SHOCK SENSOR / OPTIONAL SENSOR BY-PASS: Press the
on the transmitter twice within 3 seconds will arm the security system, by-
pass the shock sensor. The system will chirp one additional time to confirm
the sensor bypass mode was activated. The sensor bypass feature is
programmed to activate for one arming cycle only. The security system will
return to normal operation during the next arming cycle
PASSIVE ARMING:
Active arming / disarming is controlling your security system via the remote
transmitter. This security system is equipped with an optional Passive
Arming feature, which allows the security system to arm 30 seconds after
the last door is closed. Operation is as follows.
1. Turn the ignition to the "OFF" position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast
for 30 seconds. If you reopen any door / hood / trunk, the security
system LED will stop flashing. It will begin flashing again once all
vehicle entrances are closed.
System Function
Arm / Lock door
Arm
and
Delete
Optional Sensor
Car Locator
Panic function
Disarm
&
Unlock
Door
Two
Steps
Door
Unlock
&
Disarm
System
Pop Trunk Release
Silent Arm / Disarm
Activate Car-Jacking
Switching code For
2nd Car Operation.
+
button together on the
Remark
Press twice.
System in Armed.
Press 3 seconds
Press twice within 3
seconds.
Press 2 seconds
Ignition
in
"off"
position.
Ignition
in
"on"
position.
button
2
Advertisement
Table of Contents
