Table of Contents
Advertisement
TRANSMITTER OPERATION
Transmitter Button
Button
–
Button
Button for 3 seconds
Button
–
Button
+
Button
+
Button
Button for 2 seconds
–
+
Button
+
Button for 1 seconds
ACTIVE ARMING – LOCK & ARM:
1. Press
button on transmitter.
The siren will chirp once and the parking lights will flash once indicating
2.
that the system is now armed. The vehicle doors will lock upon arming
when interfaced with the security system.
Note: Defective sensor reminder: If the siren sounds 3 chirps, then you
have left a door, trunk, or hood lid ajar.
SILENT ARMING / DISARMING: Press the
transmitter to arm or disarm your security system, No chirp sound will be
heard; arm / disarm confirmation will be through the vehicles parking lights
only.
SHOCK SENSOR / OPTIONAL SENSOR BY-PASS: Pressing the
on the transmitter twice within 3 seconds will arm the security system, and
will by-pass the shock sensor or the optional sensor connected to 4 pin plug.
The system will chirp one additional time to confirm the sensor bypass mode
was activated. The sensor bypass feature is programmed to activate for one
arming cycle only. The security system will return to normal operation during
the next arming cycle
System Function
Arm / Lock door
Arm and Delete
Optional Sensor
Panic function
Disarm & Unlock
Door
Two Steps Door
Unlock & Disarm
System
rd
3
Channel Auxiliary
Car Locator
Pop Trunk Release
Passive arming
By-pass
Silent Arm / Disarm
Activate Car-Jacking
+
button together on the
4
Remark
Press twice.
Press 3 seconds
Press twice within 3
seconds.
System in Armed.
Press 2 seconds
While system is
disarmed
Ignition in "off"
position.
Ignition in "on"
position. Must be
Programmed "ON"
button
Advertisement
Table of Contents
