Auto Page C3-RS-730 LCD Operation Manual

Auto Page C3-RS-730 LCD Operation Manual

Professional 2-way lcd remote car starter & alarm system with built in temperature, voltage sensor and two-way serial port data link

Advertisement

C3-RS-730 LCD
PROFESSIONAL 2-WAY LCD REMOTE CAR STARTER & ALARM
SYSTEM
With
Built in Temperature, Voltage Sensor
And Two-way Serial Port Data Link
Compatible
OPERATION MANUAL
Please register your product at:
www.autopageusa.com
THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY
1

Advertisement

Table of Contents
loading

Summary of Contents for Auto Page C3-RS-730 LCD

  • Page 1 C3-RS-730 LCD PROFESSIONAL 2-WAY LCD REMOTE CAR STARTER & ALARM SYSTEM With Built in Temperature, Voltage Sensor And Two-way Serial Port Data Link Compatible OPERATION MANUAL Please register your product at: www.autopageusa.com THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY...
  • Page 2: Product View

    RS-730 LCD . Auto Page, Inc. has over 25 years of experience in the vehicle security industry in the United States and is a wholly owned subsidiary of Iwata Electric Co., of Tokyo, Japan. Iwata has been an industry leader for over 50 years, establishing a reputation for ingenuity in its engineering capability and innovative communication products.
  • Page 3: Battery Replacement

    A. BATTERY REPLACEMENT: This system needs no specific maintenance beyond remote control battery replacement. The 2-way remote is powered by a 1.5V AAA battery. The 1-way remote is powered by a pair of 3V, CR2016 batteries. Battery Level Indicator (2-way remote) The Battery Level indicator has three level indicators that serve as a visual indication of battery charge.
  • Page 4: Remote Transmitter Operation

    Manual Gear Activate Channel 3 (Trunk Release). Engine Start Memorizing for the car with manual gear was set up Activate Channel 3 Activate Channel 4 Time Monitor Alarm Clock 12:00 12:00 You have set morning call alarm Parking Meter Low Battery Reminder when time is up for parking You have to replace the battery of remote control.
  • Page 5: Arming And Disarming

    3. Trigger Alarming Flashes Slow Flash Disable Flashes 4. Passive Starter Fast Flash Disable Disable 5. Panic Alarming Flashes Flashes 6. Car-Jacking Alarming Flashes Disable Flashes 7. Car Locator 6 Chirps 12 Flashes Locking E. ACTIVE ARMING – LOCK & ARM: button 1.
  • Page 6: Valet Mode

    TAMPER DISARMING : If the alarm is triggered, upon disarm the system’s siren will chirp 4 times, and the parking lights will flash 3 times telling you the alarm has been triggered during the last armed state. PATHWAY ILLUMINATION: When receiving an unlock /disarm signal, this feature will turn the parking lights “ON”...
  • Page 7: Car Locator And Panic Function

    locks will remain operational. To use the valet mode, the system must first be disarmed either by using your remote transmitter, or by operating the Manual Override sequence. Get into/out valet mode using the ignition key. Enter Valet Mode: a). Under disarm mode, turn the ignition to “ON” position. b).
  • Page 8 1.When the Ignition is ON press button four times while “CAR JACK” is flashing in the text area, then press button to activate Anti Car-Jacking mode or Under ignition ON , press and hold the buttons at the same time for 2 seconds. The parking lights will turn on for 1.5 seconds to indicate the system has entered the anti car-jacking mode.
  • Page 9: Trunk Release (Channel 3) Output

    Q. DOME LIGHT CONVENIENCE SUPERVISION (Optional Feature) The alarm has a unique feature that will turn on your vehicle dome light as follows: 1. Upon disarming, the interior light wi ll remain on for 30 seconds. 2. If the vehicle is intruded, the interior light will flash for the same duration as the siren. Note: Turning on the ignition switch or arming the alarm will turn off the dome light.
  • Page 10: Remote Start Operation

    X. Clear the Flash Icon and Melody Sound: The Transmitter will reset the flashing icons the next time the Ignition is cycled to the ON position. Y. Stop The Trigger Melody Sound: While triggering the alarm the LCD screen will alert the user through a melody sound and a flashing trigger icon.
  • Page 11: Timer Start

    1. Before turning off the engine, press the button once on the transmitter and the LED indicator will flash 3 times to confirm enter. 2. Turn the ignition key to OFF position. (The engine will stay running.) 3. The engine will run until the pre-programmed time elapsed or shutdown input is received. D.
  • Page 12 2. Immediatel y depress the button then press and hold the button for 2 seconds. (or depresses buttons, if you program buttons = Start / Stop button.) The parking light will flash (4) times. The siren or horn chirps (4) times. The vehicle is no longer programmed to start automatically. F.
  • Page 13: Hidden Alarm

    Table 1: ONE beep to confirm (Press and hold until ONE Beep is heard) Button LCD Display Button Press once Backlight turns on for 5 seconds PASS Press twice within 5 Press button to arm the alarm seconds PASS icon flashing and bypass the sensor 1.
  • Page 14: Programming Lcd Remote

    Table 5: Do-Re-Mi sounds to confirm Button LCD display Button DEFLT Press and hold the flashing Press & hold button for 2 seconds Button for 6 second until to back to default setting and 1 chip for Do-Re-Mi sounded confirm D.
  • Page 15 Second Vehicle Default is CAR 1 Security Operation Menu CAR 1 - Car Select -CAR 1 operation. CAR 2 - CAR 2 operation. Clock Menu Default is 12:00AM - Clock hours - Adjusts clock hour from 0 to 12 12 is flashing 12:00AM - Clock minutes - Adjusts clock minute from 0 to 59...
  • Page 16 “Proof of Purchase” (dated sales receipt) must accompany all warranty returns; otherwise, your return will be rejected and sent back. After one (1) year, the purchaser should ship the unit prepaid to Auto Page with a money order in the amount of $30.00 to cover shipping and handling charges.
  • Page 17 OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Auto Page shall not be liable, under the foregoing WARRANTIES or otherwise, for: Any personal injury of any kind to the purchaser, its employees or agents or anyone else whomsoever resulting directly or indirectly from the use or presence of the equipment or parts;...
  • Page 19 It is recommended to have a minimal digital service plan on your cell phone Your RS-730 is CI3 compatible and will open your world to the true power of two way communication. Complete tracking and full cell phone functionality can be added to your system. For more information please visit your local authorized Autopage dealer or go to www.autopageusa.com...
  • Page 20 NOTES: BLANK PAGE...
  • Page 21 Compatible 2-Way Communication to the Power of 3 960 Knox Street Unit B, Torrance, CA 90502 Tel: (310) 323-1800 or (800) 262-2527 www.autopageusa.com...

Table of Contents