Installing The Battery; Power Switch Board; Removing The Power Button Board - Dell Latitude 7285 Owner's Manual

2-in-1 laptop
Hide thumbs Also See for Latitude 7285:
Table of Contents

Advertisement

NOTE:
Once the battery cable is disconnected, practice caution not to damage the battery connector on the system
board. The pins of the battery connector are extremely fragile, be careful not to bend the pins.
NOTE:
For defective system boards, technicians must always ensure that they attach the battery connector cap when
re-packaging it for return.

Installing the battery

1
Insert the battery into the slot on the tablet.
2
Replace the M2x3 (4) screws to secure the battery to the tablet.
3
Install the:
a
display panel
b
microSIM card
and
4
Follow the procedure in

Power switch board

Removing the power button board

1
Follow the procedure in
2
Remove the:
a
microSIM card
and
b
display panel
c
battery
3
To remove the power button board:
a
Lift the latch and disconnect the power button cable from the tablet [1].
24
Removing and Installing components
microSD card
After working inside your
tablet.
Before working inside your
microSD card
tablet.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents