Deploying The .Raw Image On Kvm - Quantum Scalar i40 Quick Start Manual

Quantum Scalar Key Manager 2.5 Quick Start Guide
Deploying the .raw
Image on KVM
18
Library
Scalar i500
Scalar i2000
Scalar i6000
Scalar i3
Note: Requires SKM 2.4 (240Q) or
later
Scalar i6
Note: Requires SKM 2.4 (240Q) or
later
• The SKM server must have IP connectivity through any firewalls to all Quantum
libraries using the SKM appliance server to obtain encryption keys.
• SKM uses TCP ports 80, 6000 and 6001 for SKM server communication. These ports
must all be open on your network in a bi-directional mode in order for SKM
communication between the SKM servers and libraries to work.
Follow the instructions below for
performed via QEMU-KVM.
Scalar Key Manager VM Installation CD
1 Insert the
drive.
2 Decompress the .raw.bz2 image file to a known location. You may copy the image
to a shared network drive for faster deployment if you wish.
For example:
bunzip2 5-01071-01_220Q.GC00300.raw.bz2
3 Launch QEMU-KVM.
4 Log on to the VM host.
5 Under the local host, right-click and select New.
The New VM wizard opens.
Minimum Firmware Required
570G
595A
600A
110G
110G
. The .raw installation process is
both SKM VM servers
into the your computer's CD ROM
Installing and Configuring the SKM KVM Servers