Pro-Form PRO 2000 User Manual page 21

Hide thumbs Also See for PRO 2000:
Table of Contents

Advertisement

CONSOLE
DIAGRAM
FEATURES OF THE CONSOLE
The treadmill console offers a selection of features
designed to make your workouts more effective and
enjoyable. When you use the manual mode, you can
change the speed and incline of the treadmill with the
touch of a button. As you exercise, the console will dis-
play instant exercise feedback. You can even measure
your heart rate using the handgrip heart rate monitor or
the chest heart rate monitor.
In addition, the console features a selection of onboard
workouts. Each workout automatically controls the
speed and incline of the treadmill as it guides you
through an effective exercise session.
You can also connect your tablet to the console and use
the iFit
®
Bluetooth Tablet app to record and track your
workout information.
You can even listen to your favorite workout music or
audio books with the console's sound system while you
exercise.
To turn on the power, see page 22. To use the man-
ual mode, see page 22. To use an onboard workout,
see page 24. To connect your tablet to the console,
see page 26. To connect your heart rate monitor to
the console, see page 26. To use the settings mode,
see page 27. To use the sound system, see page 27.
To use the tablet holder, see page 27.
Note: The console can display speed and distance
in either miles or kilometers. To change which unit of
measurement is selected, press the Standard/Metric
button. For simplicity, all instructions in this section
refer to miles.
IMPORTANT: If there are sheets of plastic on the
console, remove the plastic. To prevent damage
to the walking platform, wear clean athletic shoes
while using the treadmill. The first time you use
the treadmill, observe the alignment of the walking
belt, and center the walking belt if necessary (see
page 31).
21

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PRO 2000 and is the answer not in the manual?

Questions and answers

Vladimir Wogen
January 31, 2025

When I press any button it just beeps at me but never turns on

1 comments:
Mr. Anderson
February 10, 2025

Your Pro-Form PRO 2000 may not turn on due to the following reasons:

1. Power Cord – Ensure the power cord is properly plugged into a grounded outlet.
2. Extension Cord – If using an extension cord, it must be a 3-conductor, 14-gauge (2 mm²) cord no longer than 5 ft. (1.5 m).
3. Key Not Inserted – Make sure the key is inserted into the console.
4. Tripped Power Switch – Check the power switch near the power cord. If it has tripped (protruding), wait five minutes and press it back in to reset.

If the issue persists, further troubleshooting may be needed.

This answer is automatically generated

This manual is also suitable for:

Pftl13116.1

Table of Contents

Save PDF