Sennheiser SKM 500 User Manual page 17

ew G3 SKM 500_529673_0109_SP8_PRT.book Seite 17 Dienstag, 10. Februar 2009 11:20 11
Adjusting settings via the operating menu
Overview of the frequency banks and channels:
Frequency bank Channels
"1" to "20" up to 32 per
frequency bank
"U1" to "U6" up to 32 per
frequency bank
When setting up multi-channel systems, please observe the following:
Only the factory-preset frequencies within one frequency bank are inter-
modulation-free (see page 20). Radio microphone and receiver of a trans-
mission link have to be set to the same frequency. It is vital to observe the
notes on frequency selection on page 20.
Entering a name – "Name"
Menu Name
Name L i c h a e l
L i c h a e l
Call up "Name" Enter a character
and confirm
"Stored"
Via the "Name" menu, you can enter a freely selectable name (e.g. the
name of the performer) for the radio microphone.
The name can be displayed on the standard displays "Frequency/Name"
and "Channel/Name". The name can consist of up to 8 characters such as:
• letters (without pronounciation marks),
• numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Move the multi-function switch to select a character.
Press the multi-function switch to change to the next
segment/character or to store the complete entry.
Activating/deactivating the automatic lock mode – "Auto Lock"
Menu Auto Lock
Auto Lock
Active
A c t i v e
Call up Select the desired
«Auto Lock» setting
"Stored"
The lock mode prevents that the radio microphone is accidentally switched
off or programed during operation. The lock mode icon
current standard display indicates that the lock mode is activated.
Move the multi-function switch to select the desired setting.
For information on how to use the lock mode, refer to page 11.
The extended menu "Advanced
Setting transmission frequencies and frequency banks – "Tune"
When you have selected one of the system banks and then select the
"Tune" menu, the radio microphone automatically switches to channel 1
of the frequency bank "U1". In this case, "U1.1" briefly appears on the
display panel. Upon delivery, the channels of the frequency banks "U1" to
"U6" are not assigned a transmission frequency.
Type
System bank:
frequencies are factory-preset
User bank:
frequencies are freely selectable
Name
Michael
Enter a character;
store the setting
Auto Lock
I n a c t i v e
Store the setting
on the
Menu"
17