Changing The Color-Coded Protection Ring; Using The Radio Microphone; Switching The Radio Microphone On/Off - Sennheiser SKM 500 User Manual

ew G3 SKM 500_529673_0109_SP8_PRT.book Seite 10 Dienstag, 10. Februar 2009 11:20 11

Using the radio microphone

Changing the color-coded protection ring

º
The color-coded protection ring prevents the multi-function switch
from accidental operation. Protection rings
able as accessories (information on accessories can be found on our web
site at www.sennheiser.com). The protection rings allow you to clearly
identify each radio microphone.
Remove the color-coded protection ring
º º
º
Put on a new protection ring as shown.
º
Using the radio microphone
To establish a transmission link, proceed as follows:
1. Switch the receiver on
(see the instruction manual of the receiver).
2. Switch the radio microphone on (see below).
The transmission link is established and the display backlighting of
the receiver changes from red to orange.

Switching the radio microphone on/off

¹
To switch the radio microphone on (online operation):
Briefly press the ON/OFF
ON/OFF
The radio microphone transmits an RF signal. The transmis-
sion icon is displayed.
¾
The red ON LED lights up and the standard display
"Frequency/Name" appears on the display panel.
You can switch the radio microphone on and
RF signal on switch-on. For more information, see below.
To switch the radio microphone off:
If necessary, deactivate the lock mode (see page 11).
Press the ON/OFF button
ON/OFF
display panel. The red
panel turns off.
10
¸
º
in different colors are avail-
º
as shown.
º
¾
button ¹.
deactivate the
¹
until "OFF" appears on the
¾
ON LED goes off and the display