Remote Control Module; Remote Control - Yale YDM 3111 User Manual

Option

Remote Control Module

Buy the Remote control Module and install it to link the remote control.
》 Install Remote Control Module
1⃞ Remove batteries
Open the battery cover
in the back body
and remove
all batteries.
3⃞ Insert batteries
Insert all the batteries by
checking the [⊕, ⊖]
connector.
Note
•The operation status may only be examined through the remote control.
20
Remote control Module
2⃞ Install Remote Control Module
Equip the Remote control Module
to the slot.
4⃞ Confirm the installation
If you hear a 'ting-a-ling'
sound, the Remote control
Module has been installed
correctly. Close the
battery cover.
Ting-a-ling

Remote Control

Not only FSK method but also the wireless encryption algorithm has been applied.
》 To Register Remote Control
Order Play
1⃞ Press
(Registration)
Open the battery cover in the back body.
button and button
Press Ⓘ (Registration) button and then, [#] button.
2⃞ Enter number 0 and
Enter the number 0 and then, 5 button on the
5 on the keypad
keypad.
3⃞ Register Remote control
4⃞ Press
(Registration) Press the Ⓘ (Registration) button in the back
button
body again to complete the procedure.
》 To Release Remote Control
Order Play
1⃞ Press
(Registration)
Open the battery cover in the back body.
button and button
Press Ⓘ (Registration) button and then, [#] button.
2⃞ Enter number 7 and
Enter the number 7 and then, 5 again on the keypad.
5 on the keypad
3⃞ Press (Registration)
Press the Ⓘ (Registration) button in the back body again
button
to complete the procedure.
Note
•The wireless encryption algorithm resorts to the floating ID technology where the wireless
password is changed every time the remote control is operated.
Option
Description
Press the SET button of the remote control
Description
21